LaserBLOCK Endovenous Bare & Radial Fiber Optics
This over-the-wire rheolytic thrombectomy device uses the Venturi effect to create a hydrodynamic vortex that draws in and fragments the surrounding thrombus. The system requires use of a specialized system that creates Rotational vortex effect prevents embolism and macarates thrombus with TPA while preventing distal embolism.
Endonenous laser ablation method is a common treatment method used to close varicose veins using high-power laser beams. In this method, laser beams are sent into the varicose veins using fiber optic laser probes. In order to provide the most appropriate treatment and to deliver the laser beams to the target area without damaging the surrounding tissues, circular (radial) light output laser probes have superior properties than probes that emit light straight from the fiber end.
It can emit light as a single homogeneous circle or as two separate homogeneous circles of equal strength, depending on the application needs. Probes produced in high quality standards do not encounter problems such as power loss and blackening, keeping the laser power low and using the laser device efficiently.
In the EVLA method, laser fiber is inserted into the vein by entering the Safena Magna vein from the wrist or knee level under ultrasound guidance. After the location of this fiber is confirmed by ultrasound, local anesthesia is applied throughout the vessel. The laser fiber is withdrawn and the entire vessel is closed by applying laser energy. The closed vessel is gradually reduced and destroyed by the body.
Usage Indication (Radial fiber, Radial Slim Fiber, Radial Slim 2 Ring Fiber, Radial 2 Ring Fiber)
FEATURES
Order Number | Moldels | Øcore (µm) | Øouter (µm) | Ø quartz cap (mm) | NA | Lenght (m) | Profile | Øışın (µm) | NA | Connector |
VS1007 | Radial Fiber | 500 | 1300 | 1.85 | 0.26/0.37 | 2.5 | One radial laser ring | ≤500 | ≤0.26 for >50 W ≤0.36 for ≤50W | SMA 905 |
VS1008 | Radial Slim Fiber | 400 | 1050 | 1.27 | 0.26/0.37 | 2.5 | One radial laser ring | ≤400 | ≤0.26 for >50 W ≤0.36 for ≤50W | SMA 905 |
VS1009 | Radial 2 ring Fiber | 500 | 1300 | 1.85 | 0.26/0.37 | 2.5 | Two radial laser rings 6 mm apart | ≤500 | ≤0.26 for >50 W ≤0.36 for ≤50W | SMA 905 |
VS1010 | Radial slim 2 ring Fiber | 400 | 1050 | 1.27 | 0.26/0.37 | 2.5 | Two radial laser rings | ≤400 | ≤0.26 for >50 W ≤0.36 for ≤50W | SMA 905 |